EasyManua.ls Logo

Bosch SHE55P - Door Spring Mechanism

Bosch SHE55P
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.1.9 Door spring
4.1.9.1 Using hinge pulley
The door spring mechanism allows dishwasher doors to open /
close with little effort and to stay open when racks are loaded or
unloaded.
The door spring connects to the cord and slides into slots in the
rear corners of the base. Springs are color coded for specific
tensions for specific door weights.
Dishwashers with wood doors have adjusting screws to change
spring tension for different wooden door panel weights. Tighten
screws (cw) to increase spring tension and loosen screws (ccw)
to reduce tension.
Dishwashers with heavy or light wood doors will need door
springs changed. The following chart shows when to adjust
tension screws and when to replace door springs.
Door Wood Panel Weight
Existing
Door
Spring
Less than 5.5
lbs (2.5 kg)
5.5 to 9 lbs
(2.5 to 4.1
kg)
9 to 15
lbs
(4.1 to
6.8 kg)
15 to 18 lbs
(6.8 to 8.2
kg)
18 to 21 lbs
(8.2 to 9.5 kg)
Violet
(168568)
Change to
173696
Yellow spring
- use tension
screw if
needed
Change to
168576 Blue
spring - use
tension screw
if needed
No action Use tension
screw to
increase
tension
Change to
182640
Orange spring
- use tension
screw if
needed
Orange
(182640)
Change to
168576 Blue
spring - use
tension screw
if needed
Change to
168568
Violet spring
No action Use tension
screw if
needed to
increase
tension
Use tension
screw to
increase
tension
702_58300000148618_ara_en_a Page 18 of 42

Related product manuals