EasyManua.ls Logo

Bosch SHU43C02 - Page 49

Bosch SHU43C02
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
VI.
VI.
Component Access/Replacement
Component Access/Replacement
Heaters &
Heaters &
NTC’s
NTC’s
Access (2)
Access (2)
To remove toe kick
:
Remove two (2) T-20 Torx
screws from toe kick.
Tilt toe kick out from under
dishwasher.
HINT: The fascia panel and door don’t
need to be removed to access the heater
& NTC. However, the door must be
removed to completely remove the tank.
To remove right & left side panels:
Remove two (2) T-20 Torx side panel screws from each side
(through holes in trim strip).
Carefully slide trim strips up and out of dishwasher. If side
panels are removed carefully to avoid damaging trim strips,
then trim strips don’t need to be removed.
Lift side panels up and out from dishwasher. Panels can be
removed with trim strips.
Remove panel screws Slide out trim strips Lift panels up and out

Table of Contents

Related product manuals