To Next PageTo Next Page
Need help?Do you have a question about the Bosch SHU5312 and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | SHU5312 |
| Place Settings | 12 |
| Energy Star Rated | Yes |
| Wash Cycles | 5 |
| Drying System | Condensation Drying |
| Control Type | Electronic |
| Number of Options | 3 |
| Energy Efficiency Class | A |
| Half-Load Option | Yes |
| Child Lock | Yes |
| Type | Built-In Dishwasher |
Explains the warning symbol for serious hazards.
Lists potential hazards like electrical shock and sharp edges.
Emphasizes disconnecting power before repair and using copper conductors.
Notes that PC boards are in plastic housings, no special handling needed.
Confirms no refrigerants are used in dishwashers.
Mentions occasional smells from drain connections.
States no government compliance issues exist.
Lists UL, Energy Star, and NSF certifications.
Details electrical, water pressure, and motor specifications.
Explains current and older model number coding systems.
Shows the location of the serial label and explains its format.
Outlines various limited warranties including 1-year, 2-year, and lifetime.
Refers to installation instructions for location requirements.
Refers to installation instructions for electrical requirements.
Refers to installation instructions for water/drain requirements.
Covers leveling, handle installation, and door reversal.
Lists common cosmetic and installation problems.
Lists essential tools for dishwasher installation.
Lists necessary materials for dishwasher installation.
Details accessory parts and kits included for installation.
Guidelines for preparing the cabinet enclosure for installation.
Electrical safety and connection requirements for installation.
Procedures for connecting the hot water supply line.
Details on dishwasher drain connection and air gaps.
Instructions for securing the dishwasher using mounting brackets.
Steps for removing the toe kick panel for access.
Preparing the junction box for electrical connections.
Guides for installing door panels on SHU models.
Positioning and leveling the dishwasher before securing.
Instructions on how to secure the dishwasher in place.
Details on connecting the dishwasher drain hose properly.
Instructions for safely connecting the hot water supply line.
Procedures for making electrical connections and grounding.
Adjusting door tension on SHU and SHV models.
Instructions for installing the base and toe panel.
Concludes installation with power-up and initial checks.
Provides guidance on contacting customer service for assistance.
Explains how Bosch dishwashers operate, including pumps, heaters, and drying.
Continues explanation of filtering, aqua sensors, and spray arms.
Illustrates water filling levels and float switch operation.
Details components like circulation pumps, NTC sensors, and water inlet valves.
Explains how the detergent and rinse-aid dispenser operates.
Describes the "Top Rack Only" feature and its actuators.
Explains the function of door latches and types used in different models.
Details how aqua sensors monitor water cleanliness and save energy.
Explains the function of water fill assemblies and their components.
How to access and remove the water valve.
Describes different water valve models and their part numbers.
Steps to access the circulation pump by removing the outer door.
Accessing circulation pumps by removing the toe kick and side panels.
Raising the tank to access the circulation pump.
How to remove control modules from fascia panels.
Disassembly steps for specific SHY, SHU, SHV models.
Instructions for removing display modules on SHY56A/66C models.
Accessing Apexx control modules mounted on the base.
Removing side panels for Apexx module access.
Raising the tank for Apexx module access.
Steps for removing the Apexx control module from the base.
Instructions for removing the Apexx display module.
Accessing the heater and NTC by removing the outer door.
Accessing heaters and NTCs by removing toe kick and side panels.
Separating the base from the tank to access heaters.
Separating the base from the tank to access heaters.
Removing and installing heater assemblies and NTCs.
Removing and installing NTC components.
Steps for removing and installing drain pumps.
Instructions for removing and installing dispenser assemblies.
Explains changes in condensation tubes for UC/12 models.
Disassembling door latches for integrated models.
Removing and replacing microswitches in door latches.
Accessing and replacing the aqua sensor.
Accessing and repairing water fill assemblies.
How to enter and use diagnostic test programs for various models.
Lists and explains error codes displayed by the dishwasher.
Procedure for measuring heater and NTC resistances using test programs.
Common dishwasher problems and their suggested solutions.
Continues troubleshooting common issues like drying and odors.
Troubleshooting for issues like no power, door problems, and draining.
Troubleshooting for water circulation, heating, and leaks.
Troubleshooting for filling issues, dispenser problems, and rinse aid lights.
Common issues related to specific parts like valves, pumps, and modules.
Troubleshooting steps for a stuck circulation pump impeller.
Diagnosing heating problems when module displays "1".
Flowchart for diagnosing heater circuit failures.
Troubleshooting steps for water leaks from dishwasher doors.
How to check the PTC pump motor starter.
Resistance measurements for PTC pump motor starters.
Preventing nuisance tripping of circulation pump thermal protectors.
Identifying new and original pumps and motor starters.
Loosening stuck impellers and replacing them.
Replacing circulation pump impellers due to debris or disuse.
Identifying upgraded vs. old impeller ceramic rings.
Details part number changes for circulation pumps.
Part number changes for UC/14 water switch models.
Explains changes in circulation pump and motor part numbers.
Troubleshooting heater relay issues on control module PC boards.
Replacing front cover for broken control module buttons.
Using module #481055 in older models and button pad changes.
Displays of new pushbutton pads and turning off end-of-cycle tone.
Compares old and new pushbutton pads and indicator lights.
Information on replacing older UC/06 model heaters with available alternatives.
Explains motor-operated water switches in Apexx and ExactWash models.
Details part changes for water switch models.
Describes sump part improvements for better draining.
Instructions for replacing damaged or detached dispenser doors.
Explains top-load dispenser features and detergent addition.
How top-load dispensers measure rinse-aid and operate.
Steps to realign misaligned dishwasher door latches.
Correcting miswired door latches and preventing module damage.
Information on updated terminal box designs with covers.
Resistance values for control modules across various models.
Wiring diagrams for SHU and SHV series dishwashers.
Wiring diagrams for SHU and SHI series dishwashers.
Wiring diagrams for SHU, SHV, and SHX series dishwashers.
Wiring diagrams for SHY, SHV, and SHX series dishwashers.
