en-us Loading the Dishwasher
20
Unloading the dishwasher
9 CAUTION
Dishes can be very hot
immediately after cycle ends.
Open the door slightly and allow
dishes to cool for a few minutes
before unloading.
Note: Dishes are more likely to chip
when unloading before cooling.
When unloading the dishwasher, to
prevent water from dripping onto dry
dishes, unload the lower
rack 1Z first. Next, unload the
silverware basket 1R followed by
the upper rack 1", and then the
third rack (if equipped).
Adjustable Upper Rack
If desired, the height of the upper
rack can be adjusted to
accommodate larger items in the
lower rack.
1.
Pull the empty upper rack 1"
out, tilt it up, and pull it all the way
out until it is free of the roller
guides.
2.
Re-insert the rack with the other
set of roller guides as shown
below.
To Next Page
Loading...
Need help?
General
