en-us Getting Started
12
Info button
Info button
The Info button 8 can be used to
display additional wash cycle
information.
1.
Press the Info button 8.
2.
Press the wash cycle button.
Information on the selected wash
cycle is indicated on the display
window at the top @.
3.
To leave, press Info button 8.
Time setting
Ti me set t i ng
When the appliance is switched on
for the first time, the time starts at
12:00 o’clock.
Set the time as follows:
1.
Open the door.
2.
Switch on On/Off switch (.
3.
Press Info button 8 for
3 seconds until the following text
is indicated on the display window
at the top @:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4.
Keep pressing button > )* until
the time setting is indicated on the
display window at the top @.
5.
Make the setting with setting
buttons + - X. If the selection
buttons + - X are held down,
the set values are changed in
10-minute increments.
6.
Press and hold the Info button
8 for 3 seconds.
The selected setting has now been
stored.
Note: If the appliance was
disconnected from the power supply
for a prolonged period, the time
starts at 12:00 o’clock. Set the time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
