Loading the Dishwasher en-us
29
Removing/Installing upper
rack*
Removing upper rack 12:
1.
Pull out upper rack all the way (1).
2.
Lift front of the upper rack out of
the catch (2).
3.
Pull out upper rack forwards and
lower (3).
Installing upper rack 12:
1.
Pull out upper rack rails all the
way (1).
2.
Insert upper rack (2). In doing so,
note the position of the detent
pins (as illustrated in Step 2).
3.
Lift upper rack slightly and insert
rear detent pins into the locking
hooks (3).
4.
Lower upper rack and press into
the front notch (4). Upper rack
“clicks” into position.
5.
Push in upper rack.
To Next Page
Loading...
