Loading the Dishwasher en-us
21
Back to back
To assemble the Double Flex
silverware basket:
Hold the two halves side by side or
back to back, so that the tab on one
basket can slip into the notch on the
other basket. Push the two halves in
opposite directions until they click.
* optional feature which may or may
not be included with your
dishwasher.
Unloading the dishwasher
9 CAUTION
Dishes can be very hot
immediately after cycle ends.
Open the door slightly and allow
dishes to cool for a few minutes
before unloading.
Note: Dishes are more likely to chip
when unloading before cooling.
When unloading the dishwasher, to
prevent water from dripping onto dry
dishes, unload the lower
rack 1j first. Next, unload the
silverware basket 1b followed by
the upper rack 12, and then the
third rack (if equipped).
Adjusting the height of the
rack
If desired, the height of the upper
rack 12 can be adjusted to create
more space for taller utensils either in
the upper or lower rack.
Arrange large plates up to a diameter
of 12.6 in (32 cm) in the lower
basket 1j as illustrated.
With silver-
ware basket
Upper rack Lower rack
Setting 1
max. ø
9.4 in
(24 cm)
12.6 in
(32 cm)
Setting 2
max. ø
10.4 in
(26.5 cm)
11.8 in
(30 cm)
Setting 3
max. ø
11.4 in
(29 cm)
10.6 in
(27 cm)
With
third rack
Upper rack Lower rack
Setting 1
max. ø
7 in (18 cm) 12.6 in
(32 cm)
Setting 2
max. ø
8 in
(20.5 cm)
11.8 in
(30 cm)
Setting 3
max. ø
9 in
(23 cm)
10.6 in
(27 cm)
To Next Page
Loading...
Need help?
General
