en-us Loading the Dishwasher
24
Extra tall item sprinkler*
If an item is too tall to be placed in
the lower rack 9" even with the
upper rack 12 in the raised
position, remove the empty upper
rack 12 by pulling it out of the
dishwasher until it stops. Pull the
front of the rack upward and outward
until the rack will not slide out
anymore. Then lift it up and away
from the dishwasher, until the rollers
are completely free of the roller
guides (A).
Set the upper rack 12 aside and
push the roller guides (A) back into
the dishwasher. Insert the extra tall
item sprinkler (B) into the upper rack
spray outlet (C) and turn the sprinkler
clockwise to lock into position.
Note: Keep the vent hole 1J on the
tub’s left side clear by placing tall
items such as plastic cutting boards
and tall baking sheets on the lower
rack’s right side or center.
NOTICE
To avoid dishwasher damage, do not
reinstall the upper rack 12 without
removing the extra tall item
sprinkler (B).
* optional feature which may or may
not be included with your
dishwasher.
$
$
%
&
To Next Page
Loading...
Need help?
General
