Operating the Dishwasher en-us
39
AutoAir™
At the end of every cycle (except
rinse) the door will automatically
open to let moisture escape and let
fresh air circulate for drier dishes.*
This feature has two settings:
1.
Open the door.
2.
Press the On/Off button (.
3.
Hold down function key # and
press Start button P until the
display 8 indicates š:x (x can
be any number).
4.
Release both buttons.
5.
Press function key # until the
display 8 indicates the factory
set value ©:‹‹.
6.
Press function key 3 to switch
the AutoAir™ feature on ©:‹‚ or
off ©:‹‹.
7.
Press Start button P to save
setting.
* Compared to Bosch dishwashers
with PureDry.
9 CAUTION
Do not operate your dishwasher
if the door mechanism is not
working properly.
To check if the door is working
correctly:
■ With the door halfway or fully
open, it should remain in
place.
■ With the door partially open,
it should close gently.
■ The door should not slam
shut or fall open from any
position.
©:‹‹ Off
©:‹‚ On
To Next Page
Loading...
Need help?
General
