deBasic settings
basic
position
Display text
A001
Selection
A00 - A01
Description
Hot water Set cold water connection
or hot water connection. Set
the device only for hot
water,
if the hot water is processed
economically and a suitable
installation is available, e.g. B.
a solar system with a
circulation line. The water
temperature should be a
minimum of 40°C and a
maximum of 60°C.
Turn on hot water
"A01" or switch off
"A00".
Efficient Dry o021 o00 - o02 Automatic opening of the
device door during
Activate or deactivate the
drying phase.
If the function is activated,
the running time may
increase.
The following settings are
possible:
¡With the setting "o00"
the automatic door
opening is deactivated in
all programs.
¡With the setting "o01"
automatic door opening is
activated in all programs.
¡With the setting "o02"
Automatic door opening is
only activated in the Eco
50°C program.
→
"Efficient Dry", page 11
1Factory setting (may vary depending on device type)
38
To Next Page
Loading...
