Basic settings en
35
Basic setting Display text Selection Description
InfoLight I01
1
I00 - I01 Switch InfoLight on or off.
While the programme is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This light
will not be visible if the appli-
ance is installed at eye level
with the cabinet front fitted
flush. If the appliance door is
not completely closed, the
spot of light will flash. The
programme has ended when
the spot of light is no longer
visible on the floor.
Level "I00" switches In-
foLightoff.
Tone volume b02
1
b00 - b03 Adjustment of tone volume.
Level "b00" switches the sig-
nal tone off.
If the Eco drying function is
activated, the end of the pro-
gramme is not indicated by
an audible signal tone.
1
Factory setting (may vary according to model)
To Next Page
Loading...
