12-3
Bosch Security Systems 09/11 BLCC500I
Solution 16i
Installation Manual Programming Examples
Sending SMS Alarm Reports
The Solution panel is capable of reporting alarm
information directly to a mobile phone using SMS
messaging without the need to add any additional
hardware.
Procedure
1) Determine the required reporting destination and
set the reporting format to SMS.
2) Program the access number into the Primary and
Secondary telephone numbers.
3) Program the mobile phone number that the
messages are to be sent to into the account code
for the corresponding destination. In multi-area
systems you will need to enter the appropriate
mobile phone number for each area.
4) Program the SMS password. The panel default is
set for the Telstra network.
5) Program the destination route for each event type
which is required to report to SMS. By default all
event types report to route 1.
» » E N D O F S E C T I O N « «
To Next Page
Loading...
