Technical Characteristics and dimensions | 47
6 720 801 512 (2013/10)Tronic 1000 T
2 Technical Characteristics and dimensions
2.1 Transport, storage and recycling regulations
• The equipment should be stored in protected areas with negative
temperatures
• Whenever applicable, the EU 2002/96/EC directive imposed and the
differentiated collection / gathering of used electrical and electronic
equipment.
2.2 Appliance Description
• Steel-glassed tank in conformity with the European regulations
• Tank designed and built to withstand high pressures
• Exterior material: steel sheeting and / or plastic
•Easy handling
• Insulating material: polyurethane without CFC
• Anticorrosion protection: magnesium anode.
2.3 Anticorrosion protection
The inside of the tank is lined with homogeneous glass enamel,
completely neutral with regards to compatibility and contact with
potable water. This lining is neutral with regard to the use with potable
water. The existence of a magnesium anode provides additional
anticorrosion protection.
2.4 Accessories (included in the appliance packaging)
Fig. 1
[1] Sleeve (2x)
[2] Cap (2x)
[3] Safety valve (8 bar)
[4] Galvanic insulator (2x)
To Next Page
Loading...
