52 | Maintenance (only for authorized technicians)
Tronic 1000 T6 720 801 512 (2013/10)
▶ Inform the user that all changes or repairs are to be carried out on the
device by authorized service technicians.
▶ Hand over all the user documentation manuals and explain their
content.
5.2 Before switching on the appliance for use
▶ Verify that the electric current is not on.
▶ Ensure that the water connections are all correctly carried out.
▶ Open the hot water tap and allow that the cold water circulates around
the interior of the appliance.
▶ Wait until water starts coming out of the hot water tap (sign that the
appliance is completely full).
▶ After having completed all the above mentioned steps and
procedures, turn on the electric current.
5.3 Temperature regulation
The temperature of the water outlet can be regulated, on the
temperature regulator selector:
• up to 70 °C
Increasing the temperature
▶ Turn the temperature selector to the left.
Fig. 9 Increase the temperature
Decrease the temperature
▶ Turn the temperature selector to the right.
Fig. 10 Decrease the temperature
5.4 Emptying the appliance
▶ Turn off the appliance from the electric supply.
▶ Switch off the water cutting valve and open a hot water tap.
▶ Open the safety valve (Fig. 11).
▶ Wait until the appliance is completely empty.
Fig. 11 Manual activation of the safety valve
6 Maintenance (only for authorized
technicians)
6.1 User information
6.1.1 Cleaning
▶ Never use abrasive, corrosive or solvent cleaning detergents.
▶ Use a soft cloth to clean the exterior of the appliance.
6.1.2 Safety valve verification
▶ Verify that the water is expelled during the heating process through
the safety purge valve.
▶ Never obstruct the safety purge valve outlet.
6.1.3 Safety valve
▶ Manually open the safety valve at least once a month (Fig. 11).
6.1.4 Maintenance and repair
▶ It is the responsibility of the client to regularly call out technical
assistance or an authorized technician to perform periodic
maintenance.
CAUTION: The first start-up of the appliance must be
carried out by an authorized technician, which will
provide the user with all the necessary information to the
best working and handling of the device.
Once the water has reached the selected temperature
level, the appliance stops heating up (the indicator
switches off). When the water temperature is below the
desired value, the appliance re-starts the heating cycle
(the indicator switches back on) until it reaches the
desired temperature selected.
DANGER: Burn risk
Open a hot water tap to and verify the temperature of the
water in the appliance before opening the safety valve.
▶ Wait until the water temperature decreases in order to
avoid burns or any other damage.
Maintenance must only be carried out by an authorized
technician.
WARNING:
Ensure the purging of the water does not cause any
damage to persons or goods.
To Next Page
Loading...
