Bosch Tronic 4000 T - Electrical Connection (Only for Approved Contractors); General Information; Connecting the Power Cable

Technical information
Tronic 4000 T – 6721843807 (2022/06)
42
Table 7 Problems
9 Technical information
9.1 Technical data
This appliance meets the requirements specified by the European Directives 2014/35/EC and 2014/30/EC.
Table 8 Technical characteristics
The water is cold and
the notice on the
display is not showing.
 Check the electrical wiring to the appliance and that the ribbon cable between the
thermostat and the display is correctly connected.
If the problems persist,
 Replace the display, in the first instance.
If the problems still persist,
 Replace the thermostat.
The buttons don't work
and a "padlock" lights
up intermittently.
 Check to see if the parental lock has been activated.
 Unlock the parental lock by pressing simultaneously (>3 s.) the and h buttons.
The "padlock" symbol should disappear from the display.
1) Solutions must only be carried out by specialised and qualified persons.
Code Problem Solutions
Technical characteristics Unit 7736506565 7736506566 7736506567
General details
Capacity l 50 75 95
Weight with empty tank kg 15 20 24
Weight with full tank kg 65 94 119
Heat loss through casing kWh/24 h 0.81 1.13 1.34
Data relating to the water
Max. permissible operating pressure MPa (bar) 0.8 (8) 0.8 (8) 0.8 (8)
Water connections Inch ½ ½ ½
Electrical details
Rated output W 1500 2000 2000
Heating time (T-50°C) 2h04m 2h21m 3h28m
Supply voltage VAC 220 - 240 220 - 240 220 - 240
Frequency Hz 50 - 60 50 - 60 50 - 60
Single phase electric current A 6.5 8.7 8.7
Power cord HO5VV - F 3 x 1.0 mm
2
or HO5VV - F
3x1.5mm
2
HO5VV - F 3 x 1.0 mm
2
or HO5VV - F
3x1.5mm
2
HO5VV - F 3 x 1.0 mm
2
or HO5VV - F
3x1.5mm
2
Protection class IP24 IP24 IP24
Type of protection Class I Class I Class I
Water temperature
Temperature range °C 30 - 70 30 - 70 30 - 70