Bosch TRONIC 6100 C - Page 26

26
|
Installation Manual
Bosch Tronic 6100 C Electric Tankless Water Heaters - BTC 724001301 A (08.2022)
6. Pull down to emove the heating element.
Figure 25
7. Install new element with red O-Ring, making sure the O-Ring and element are
positioned correctly.
It is recommended to replace the O-ring to avoid leaking.
Figure 26
8. Insert new heating element into heating canister
Figure 27
9. Align tab on the inside of the heating canister with notch in element bottom
so they are slightly off center. Push the element bottom up slightly into the
canister so it is above heating canister tab. Then rotate to align notch with
the tab. Pull element down to seat notch in the heating canister tab.
Figure 28
Heating Canister
Tab (located on
inside of canister)
Notch in
Element bottom
1
2
Figure 29
Heating Canister
Tab (located on
inside of canister)
Notch in
Element bottom