12
TRZ 12-2
6 720 610 625 (01.11)
3.3.2 Entering the heating pro-
gramme (groups P1...P6)
Up to 6 groups can be programmed,
each with a heating or economy mode
starting time and an allocated tempera-
ture (for factory defaults for groups
P1..P6 refer to table in Appendix).
In the default setting, groups P1 and
P2 are active.
Activating/deactivating groups
B Press the Prog button (5) repeatedly
until the desired group appears.
B Press the Set button (17) so that the
group number (1...6) stops flashing
(= ON) / starts flashing (= OFF).
B If desired: select another group.
B Press the Prog button (5) repeatedly
until SEt appears.
B Press the Set button (17) to store
the active group settings.
Changing the basic setting
B Press the Prog button (5) repeatedly
until the desired group appears.
B Press and hold the Day button (4)
and set the days of the week (1...7,
1-5, 6-7 or 1-7) by pressing the
/ buttons.
B Press and hold the Hour button (3)
or the Minute button (2) and use the
/ buttons to set the start time
for heating/economy mode.
B Set the temperature using the
/ buttons.
B Press the Prog button (5) repeatedly
until SEt appears.
B Press the Set button (17) to store
the settings.
3.3.3 Entering the holiday pro-
gramme
B Press the Holiday button, , (18).
The hour display will start flashing.
B Press and hold the Day button (4)
and set the number of days until the
holiday programme is to start by
pressing the / buttons (max.
99 days – the programme starts at
midnight, so you should not include
today).
The minute display will start flashing.
B Press and hold the Day button (4)
again and set the number of days
holiday by pressing the / but-
tons (max. 99 days – the programme
ends at midnight, so you should only
count the day of your return if you
don’t want the heating to come on
on that day).
B Set the temperature using the
/ buttons.
i
Avoid time overlaps.
English
To Next Page
Loading...
