7
Programme overview also see Page 5
After drying, laundry is to be ...
T-shirt
Shirts
Trousers
Skirts/dresses
Sportswear
Work clothing
Anoraks
Towelling
dressing gowns
Underwear
Socks
Bed linen
Table linen
Terry towels
Tea towels/
towels
c
ironed
lightly ironed
@c
not ironed
c
mangled
LF Cottons
max. 8 kg Suitable for cottons, coloureds and linens.
Iron Dry ø@
********
+. Cupboard Dry @
*****
+: Very Dry @******
I Easy-Care
max. 3.5 kg For non-iron laundry made of synthetic fibres and mixed fabric, cotton.
Iron Dry cø@c
******
+. Cupboard Dry @**
+: Very Dry @***
A Super Quick 40’
max. 2 kg
For laundry made of synthetic fibres, cotton or bl ended fabrics (for example) that needs to be dried quickly.
The values may differ from the those specifie d depending on the type of fabric, composition of the laundry to be dried, residual
moisture in the fabric and size of the load.
ZSportswear
max. 1.5 kg
For fabrics with a membrane coating, water-r epellent fabrics, functional clothing, fleece fabrics (dry removable internal lining
from jackets/trousers separately).
L Mix
+. Cupboard Dry
max. 3 kg
For mixed items of laundry made of cotton and easy-care fabrics.
/ Woollens Finish
max. 3 kg
For woollen fabrics suitable for washing machines . Fabrics become fluffier but not dry.
Remove fabrics once the programme has ended and allow to dry.
Timed progr.
Warm 20’
max. 3 kg
For pre-dried, multi-layered fabrics or small, individu al items of laundry.
Also for subsequent drying.
1110 / 9000576531
*576531*
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München/Germany
WTE86303AU
8
Installation
– Delivery specification : dryer, instructions for installation and use, woollens basket
(depending on model).
– Check dryer for transport damage.
– The dryer is very heavy . Do not attempt to lift it on your own.
– Be careful to avoid sha rp edges.
– Do not lift the dryer by any of the protruding parts (e.g. the door) as they may break off.
– Do not set up in a room that is susceptible to frost.
Freezing water may cause damage.
– If in doubt, have the ap pliance connected by an expert.
Setting up the dryer
– The appliance plug must always be accessible.
– Ensure that the appliance is installed on a clean, level
and solid surface.
– Keep the cooling gri lle at the front of the dryer
unobstructed.
– Keep the area around the dryer clean.
– Make the dryer level using the threaded feet
and a spirit level.
Do not remove the threaded feet unde r any
circumstances.
Mains connection see safety instructions
a
Page 11.
– Connect to an AC earth ed socket. If in doubt have the socket ch ecked by an expert.
– The mains voltage and the voltage shown on the rating plate (
a
Page 9) must correspond.
– The connected load and necessary fuse protection are specif ied on the rating plate.
Frost protection / Transport
Preparation
1. Empty t he condensation container
a
page 4.
2. Sele ct any programme using the programme selector.
3. Press the Start/
Stop button
a
condensation is pumped into the co ntainer.
4. Wai t 5 min., and then empty the condensat ion container again.
5. Turn the programme selector to Off.
Take all accessory parts
out of the drum.
The drum must be empty.
Make sure that the air
inlet remains unobstructed
Clean and level
Do not operate the dryer if
there is a danger of fro st.
Do not set up the dryer behind a doo r or sliding
door as this may obstruct or prevent the dryer door
from opening. This will prevent a potent ially fatal
danger to children from locking themse lves in.
9
Technical data
ʠ
Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)
Weight approximately 45 kg
Max. capacity 8 k g
Condensation container 4.2 l
Connection voltage
Connected load
Fuse protection see appliance rating plate
Ambient temperature
Product number/
Production number
You can find the rating plate on the back of the dryer.
ʠ
Consumption rates
These are guide values determined under standard
conditions. Fluctuations up to 10% are possible.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
LF Cottons 8 kg 10 A 10 A
Cupboard Dry +.* 1400 (approx. 50 %) 131 3.74
1000 (approx. 60 %) 148 4.49
800 (approx. 70 %) 165 5.17
Iron Dry * 1400 (approx. 50 %) 109 2.24
1000 (approx. 60 %) 126 3.44
800 (approx. 70 %) 143 3.86
Easy-Care 3.5 kg 1000 45 1.05
Cupboard Dry +.* 800 (approx. 40 %) 48 1.35
600 (approx. 50 %) 60 1.65
*Test program according to DIN EN 61121.
**The values may differ from the th ose specified depending on the type of fabric, mixture of
laundry to be dried, residual moistur e in the fabric and loading capacity.
ʠ
Drum interior light (depending on model) (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and also after the prog ramme is
started. It goes out automatically. Replacing the bulb
a
Page 10.
Optional accessories (order from the a fter-sales service using the order number)
Connection fittings for condensation outlet
The condensation is conveyed dire ctly via a hose.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space. This connection set must always be used to secure the dryer to the washing
machine. With pull-out worktop: WTZ 11300.
Installation underneath the worktop
Risk of electric shock!
Instead of the appliance covering pla te, you must have a metal cover fitted by an expert.
10
What to do if ...
If you cannot rectify a fault yourself, ple ase contact our after-sales service. W e will always find
an appropriate solutio n and will avoid unnec essary visits by engineers. T rust the expertise of
the manufacturer an d rest assured that the re pair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclo sed
after-sales service directory, or by calling one of thes e numbers:
– GB 0844 8928979 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
– IE 01450 2655
When contacting the after-sa les service, please quote the appliance 's product number (E no.)
and production num ber (FD) (see the inside of the door).
Set the programme se lector to
Off and remove the appl iance plug from the soc ket.
ʠ
The Start/Stop indicato r
lamp does not light up.
Mains plug plugged in?
Programme selected?
ʠ
The nContainer and
Start/Stop indicator lights are
flashing.
Empty the condensation container.
If featured, check hose for condensat ion outlet.
ʠ
The .Filter and Start/Stop
indicator lights are flashing.
Clean the fluff filter and/or air cooler
under running water
a
Page 4/6.
ʠ
Dryer does not start. Start/Stop button selecte d?
Door closed?
Programme set?
Ambient temperature greater than 5 ° C?
ʠ
Water is running out. Align dryer horizontally.
Clean air cooler seal.
ʠ
The door opens by itself. Push the door closed until you hea r it engage.
ʠ
The required degree of
dryness was not achieved or
the drying time was too long.
Clean the fluff filter and/or air cooler
under running water
a
Page 4/6.
Empty condensation container
a
Page 4.
Check water outlet (if featured).
Ambient temperature higher than 35 °C
a
airing.
Air inlet may be blocked
a
keep unobstructed.
Was an unsuitable programme selec ted?
a
Page 7.
Has the dryer been installed with suff icient space on all
sides? Ensure that air can circulate.
Fine layer of scale on the moisture se nsors
a
Clean the
moisture sensors
a
page 6.
ʠ
Laundry damp. Use the next drying programme up or use the timer
programme as a supplement
a
Page 7.
Warm laundry feels damper than it really is!
ʠ
The moisture content of the room
has increased significantly.
Make sure the room is sufficiently venti lated.
Air inlet blocked?
a
keep unobstructed.
Ensure that the air cooler has been inse rted.
ʠ
Mains failure. Remove laundry from the dryer immediately and spread out.
This allows the heat to dissipate.
ʠ
One or more indicator lights for
programme status are
flashing.
Clean filter and air cooler
a
Page 4/6.
Check installation conditions
a
Page 8.
Switch off, leave to cool down, switch on a gain, restart
programme.
ʠ
The interior light is not working
(depending on model).
Pull out the appliance plug, remove the cover cap in the
interior above the door (use Torx 20 scre w driver) and
replace the bulb. Close the cover cap.
Never operate the dryer without a co ver cap.
11
Safety instructions
Emergency
– Pull the appliance plug out of the socket immediately or disconnect th e fuse.
ONLY use the
dryer...
– In rooms inside the house.
– To dry fabrics.
The dryer must
NEVER...
– Be used for other purposes than those described above.
– Be modified in terms of its technology or attributes.
Dangers
– The dryer must not be used by children or persons who have not been
instructed in its use.
– Do not leave children unsupe rvised near the dryer.
– Keep pets away from the dry er.
– Remove all objects from pockets.
Make especially sure that cigarette lighters are removed as they constitute an
a
explosion hazard.
– Do not lean or sit on the do or
a
risk of tipping.
Installation
– Secure loose cables
a
tripping hazard.
– Do not operate the dryer i f there is a risk of frost.
Mains
connection
– Connect the dryer accordi ng to specifications to an AC earthed soc ket, as
otherwise it cannot be guaranteed that the appliance is completely safe.
– The cable cross-section mu st be sufficient.
– Only use earth-leakage cir cuit breakers with the following symbol:
– The appliance plug and so cket must be compatible.
– Do not use multiple plugs/c ouplings and/or extension cables.
– Do not hold the appliance plug with wet hands
a
risk of electric shock.
– Never pull the appliance pl ug out of the socket by its cable.
– Do not damage the mains l ead
a
risk of electric shock.
Operation
– Only load the drum with laun dry.
Check the contents before you switc h the dryer on.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nai l polish remover, stain remover,
cleaning solvent, etc.)
a
fire/explosion hazard.
– Dust (e.g. coal dust, flour) pos es a danger: do not use the dryer
a
explosion hazard.
– Do not put laundry containing foamed material/rubber in the dryer
a
elastic
material may be destroyed and the d ryer may be damaged due to possible
deformation of the foamed material.
– Switch off the dryer once the programme has ended.
– Condensation is not drinking water and may be contaminated with fl uff.
Defect
– Do not use the dryer if it is def ective or if you suspect it is.
Repairs must only be carried out by t he after-sales service.
– Do not use the dryer if the m ains cable is defective. To avoid danger, o nly
have the defective mains cable replac ed by the after-sales service.
– Always pull the mains plug out of the socket before changing the bulb for the
interior light
a
risk of electric shock.
Spare parts
– Only use genuine spare parts and accessories for safety reasons.
Disposal
– Dryer: pull out the appliance plug, then cut off the mains cable from the
appliance.
Dispose of at municipal waste dispos al facility.
– Packaging: do not leave chi ldren alone with packing parts
a
risk of suffocation.
– All materials are environmentally sound and can be reused. Dispose of in an
environmentally-responsible manner.
Instructions for
installation and use
Tumble dryer
Read these instructions before opera ting the dryer.
en
Observe the safety instructions on p age 11.
To Next Page
Loading...
