Bosch UniversalDrill 18V - Page 15

English | 15
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
u Switch the power tool off immediately if the applica-
tion tool becomes blocked. Be prepared for high
torque reactions which cause kickback. The applica-
tion tool becomes blocked when it becomes jammed in
the workpiece or when the power tool becomes over-
loaded.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The
cordless drill/driver UniversalImpact18V is also designed
for impact drilling in brick.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Operating mode presetting ring
(UniversalImpact18V)
(5)
Gear selector switch
(6)
Battery release button
a)
(7)
Rechargeable battery
a)
(8)
Worklight
(9)
Rotational direction switch
(10)
On/off switch
(11)
Handle (insulated gripping surface)
(12)
Universal bit holder
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless Drill/Driver UniversalDrill18V UniversalImpact18V
Article number
3603JD40.. 3603JD41..
Rated voltage V= 18 18
No-load speed
A)B)
– First gear min
-1
0–440 0–440
– Second gear min
-1
0–1450 0–1450
Max. torque, hard/soft screwdriving application
according to ISO5393
A)B)
Nm 32/23 34/23
Max. torque
A)
Nm 40 34
Impact rate at no-load speed
A)
min
-1
– 0–21 750
Max. drilling diameter (First/Second gear)
– Masonry mm – 10
– Steel mm 10 10
– Wood mm 30 30
Chuck capacity mm 10 10
Max. screw diameter mm 8 8
Max. impact drilling diameter mm – 6
Weight according to
EPTA-Procedure 01:2014
B)
kg 1.2 (1.5Ah)–1.6 (6.0Ah) 1.3 (1.5Ah)–1.6 (6.0Ah)
Recommended ambient temperature during
charging
°C 0 to +35 0 to +35
Permitted ambient temperature during opera-
tion
C)
and during storage
°C –20 ... +50 –20 ... +50
Recommended rechargeable batteries PBA 18V...W-. PBA 18V...W-.
Bosch Power Tools 1 609 92A 7WL | (03.06.2022)