Bosch UT-L 18 - Integrated Heat Exchanger Without Condensing Technology - ECO 7

14 | Technical description
UNIMAT6 720 807 794 (2013/04)
3.3.2 Integrated heat exchanger without condensing technology — ECO 7
Fig. 9 Integrated heat exchanger without condensing technology — ECO 7
W32.000 Flue gas heat exchanger
W32.510 Connection for water outlet
W32.008 Inspection aperture on the flue gas side
W32.509 Connection for water inlet
D03.000 Flue gas connecting branch
1)
If the heat exchanger is designed to have several
bundle elements, the dimensions increase by
300 mm per bundle.
2)
For heat exchangers having a water inlet/water
outlet with an internal diameter of DN150, the
dimensions increase by 50 mm.
740
1)
2)
560
W32.509
W32.000
D03.000
W32.510
H2
H1
B1
B2
W32.008
6 720 803 977-10.1itl
Heat exchanger
Shipping weight Water capacity Measurements
1 bundle 2 bundle B 1
2)
B 2 H 2
ECO 7 [~kg] [~kg] [l] [mm] [mm] [mm]
390/245 90 140 10 809 490 459
510/325 110 180 15 929 550 539
600/378 140 220 20 1019 595 592
690/432 160 260 26 1109 640 646
750/485 190 310 29 1169 670 699
890/592 230 370 37 1309 740 806
930/618 250 400 42 1349 760 832
1000/672 280 440 46 1419 795 886
1110/752 300 480 52 1529 850 966
1300/885 350 550 64 1719 945 1099
1350/965 420 670 85 1769 970 1179
1550/1045 480 780 98 1969 1070 1259
1600/1072 540 890 119 2019 1095 1286
1750/1178 600 980 125 2169 1170 1392
1900/1258 660 1060 148 2319 1245 1472
2050/1365 760 1240 173 2469 1320 1579
2200/1472 850 1390 200 2619 1395 1686
Table 5 Main dimensions