Bosch VAC120 - Assembly Instructions; Installing and Removing Crevice Nozzle; Inserting and Releasing Battery Pack

-7'322)'8 &%88)6= 4%'/
*
631 8330 36 40%') 8,)
7;-8',-28,)03'/)(363**437-8-32&)*36)
1%/-2+ %2= %77)1&0= %(.9781)287 36
',%2+-2+ %'')7736-)7 Such preventive
safety measures reduce the risk of starting
the tool accidentally.
!
!$$
To install, firmly insert the crevice nozzle
completely into the intake port on the dust
chamber with the mark (shown in the
illustration) facing down. (Fig. 2).
To remove, simply pull out of dust canister.

#
Release battery pack from tool by pressing on
both sides of the battery release tabs and pull
downward (Fig. 3).
To insert battery, align battery and slide
battery pack into tool until it locks into position.
Do not force.
* &%88)6= 6)0)%7) 8%&7 %6)
'6%'/)( 36 38,)6;-7)
(%1%+)((3238-27)68-2838330 Battery can
fall out during operation.
-8-
77)1&0=
!
WARNING
FIG. 2
!
$$







BATTERY
RELEASE
TABS
FIG. 3
!
WARNING
BM 2610035086 05-14_VAC120 5/14/14 8:50 AM Page 8