Bosch WAJ280L2SN - Page 34

en Cleaning and servicing
34
5. Slide a sufficiently large container
under the opening.
6.
CAUTION-Risk of scalding!
When you wash at high temperat-
ures, the detergent solution gets
hot.
▶ Do not touch the hot detergent
solution.
To allow the detergent solution to
flow out into the container, remove
the pump cap carefully.
Cleaning the drain pump
Requirement:The drain pump is
empty. →Page33
1. Clean the interior, the thread on
the pump cap and the pump hous-
ing.
The pump cap is comprised of two
parts which can be taken apart for
cleaning.
2. Ensure that the impeller in the
drain pump can rotate.
3. Insert the pump cap.
‒ Ensure that the parts of the
pump cap are correctly as-
sembled.
4. Screw the pump cap as far as it
will go.
The handle on the pump cap must
be in a vertical position.