Bosch WAN28020SN - Page 21

Display en
21
Display Description
––– Rinse hold
Programme status
End Program end
Programme status
⁠ ¡ Lights up: The childproof lock is activated.
¡ Flashes: The childproof lock is activated and the appli-
ance has been operated.
→"Deactivating the childproof lock", Page30
⁠ Shortened programme length is activated.
→"Buttons", Page22
⁠ Lights up: The voltage control system has paused the pro-
gram due to impermissible voltage drops. The voltage is
permissible again and the programme continues.
Note:The programme duration is extended.
⁠ Flashes: The voltage control system has paused the pro-
gramme due to impermissible voltage drops.
Note:The programme continues when the voltage is per-
missible again.
⁠ ¡ Lights up: The door is locked and cannot be opened.
¡ Flashes: The door is not closed properly.
¡ Off: The door is unlocked and can be opened.
⁠ ¡ No water pressure.
¡ The water pressure from the tap is too low.
E:35 / -10
1
Error code, error display, signal.
→"Troubleshooting", Page37
1
Example