28
Memory 1 and 2
The programme and all settings are permanently stored under
Memory 1 and Memory 2.
Saving:
1.
Select Memory 1 or 2 programme.
2.
If a programme has not yet been selected for this memory
programme, select programme according to the instructions
on the display panel. The selection of the programme is
automatically acknowledged by a tick.
3.
If required, change temperature, spin speed and Finished in
time in the main menu and/or select programme options.
The programme is automatically saved and displayed:
The saved programme can be changed by pressing the button
under the programme for as long as the arrow is displayed.
Starching
²
The washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch
into the dispenser M according to manufacturer’s specifications
(if required clean beforehand).
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless steel!
Observe specifications of the dye manufacturer! Do not discolour
washing in the washing machine!
Soaking
Pour soaking agent/detergent into dispenser II according to the
manufacturer’s instructions. Set programme selector to
and select A Avvio/Pausa (Start/Pause). After approx.
10 minutes select A Avvio/Pausa (Start/Pause). After the
required soaking time reselect A Avvio/Pausa (Start/Pause), if
the programme is to be continued or change the programme.
²
Insert washing of the same colour. No additional detergent
required, the soaking solution is used for washing.
××××
40°C 14000 0:53h
T $
Mixed Fabric
ÖÖÖÖ
To Next Page
Loading...
