Transport and storage 11/46
RE51550-B/09.2019, BoschRexrothAG
When carrying out maintenance work of any kind, applicable safety and operating
regulations of the country of use must be observed.
The cleaning method for the devices must be adapted to the IP protection class of
the devices. Do not use cleaning agents that can damage the materials used.
DANGER
Toxic, corrosive gases / liquids!
Protect yourself from toxic, corrosive gases/liquids during all work. Wear
appropriate protective equipment.
3 Transport and storage
The products should only be transported in their original packaging or a suitable
replacement.
When not in use, the operating equipment must be protected against humidity and
heat. They must be kept in a covered, dry and dust-free room
at room temperature.
To Next Page
Loading...
