Bosch WGM-B-1X/2A1S-G34-V - Default Chapter; Table of Contents

RE51550-B/09.2019, BoschRexrothAG
3/46
Contents
Contents
1 Introduction 5
1.1 Intended use 5
1.2 Functionality 5
1.2.1 Humidity monitoring 5
1.2.2 Temperature monitoring 6
1.2.3 IO-Link 6
1.3 Construction types 6
1.4 Typekey 7
1.5 Scope of delivery 8
1.6 Representation of information 8
1.6.1 Safety instructions 8
1.6.2 Warning signs and symbols 9
2 Safety instructions 10
2.1 Important notes 10
2.2 General hazard notes 10
3 Transport and storage 11
4 Set-up and connection 12
4.1 Assembly 12
4.1.1 Installation recommendations 13
4.2 Electrical connections 13
5 Operation 14
5.1 WGM-D/WGM-R 14
5.1.1 Switch-on procedure 14
5.1.2 LED status displays 14
5.1.3 General key functions 15
5.1.4 Active key lock 16
5.1.5 Menu overview 16
5.1.6 Changing the basic settings 18
5.1.6.1 Restore factory settings (reset) 18
5.1.6.2 Switching off the normal troubleshooting 20
5.1.6.3 Defining the unit for humidity 20
5.1.6.4 Defining the unit for temperature 20
5.1.6.5 Defining the switching outputs 21
5.1.6.6 Setting the update rate of the display 21
5.1.6.7 Activate / deactivate key lock 22
5.1.7 Switching outputs 22
5.1.7.1 Switching output x: Definition of the switching characteristic 23
5.1.7.2 Switching output x: Upper switching limit (switching point) 24
5.1.7.3 Switching output x: Lower switching limit (switch-back point) 24
5.1.7.4 Switching output x: Switch-on delay 25
5.1.7.5 Switching output x: Switch-back delay 25
5.1.7.6 Switching output x: Testing the switching output 26
5.1.7.7 Change display function of the status LED 26