Bosch WGM-B-1X/2A1S-G34-V - Scope of Delivery; Representation of Information; Safety Instructions

8/46 Introduction
BoschRexrothAG, RE51550-B/09.2019
1.5 Scope of delivery
▶ Oil humidity sensor WGM
▶ Product documentation
1.6 Representation of information
Consistent safety instructions, symbols, terms and abbreviations are used in this
documentation so that you can quickly and safely work with your product. For
a better understanding, they are explained in the following sections.
1.6.1 Safety instructions
In this documentation, safety instructions are contained in chapter 2
"Safety instructions" and wherever a sequence of actions or instructions are
explained which bear the danger of personal injury or damage to property.
The measures described for hazard avoidance must be observed.
Safety instructions are set out as follows:
SIGNAL WORD
Typeand source of danger!
Consequences in case of non-compliance
▶ Hazard avoidance measures
▶ <Enumeration>
• Warning sign: draws attention to the danger
• Signal word: identifies the degree of danger
• Typeand source of danger!: specifies the type and source of danger
• Consequences: describes the consequences in case of non-compliance
• Avoidance: specifies how the danger can be prevented
Table 1: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word Meaning
DANGER
Indicates a dangerous situation which will cause death or
severe injury if not avoided.
WARNING
Indicates a dangerous situation which may cause death or
severe injury if not avoided.
CAUTION
Indicates a dangerous situation which may cause minor or
medium personal injury if not avoided.
NOTICE
Damage to property: The product or the environment could
be damaged.