EasyManua.ls Logo

Bosch WORCESTER Greenstar CDi Classic Series - The Worcester Greenstar System Filter

Bosch WORCESTER Greenstar CDi Classic Series
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
NEW
Modern condensing boilers are precision-engineered and
designed to run with a clean water heating system. Over
time, dirty system water will damage a boiler and its
components, causing failures and shortening the life of the
overall system.
Damaged boiler and system
components
Blockages in primary
heat exchanger
Increased wear on pumps
Blocked valves.
Reduced effi ciency
Energy effi ciency loss
equivalent to a boiler being
reduced from A rated
effi ciency to D rated, resulting in fuel wastage
Blocked radiators can reduce effi ciency and
heating comfort.
A highly-effective solution
from the brand you can trust
The Worcester Greenstar
System Filter has been
specifi cally designed to
combat the damaging
effects of system debris
and pollutants, allowing
homeowners to protect their
boiler or heat pump for a
fraction of its cost. The fi lter
is suitable for 22mm piped heating systems.
The Greenstar System Filter is easy to
install and service
Heat exchanger damaged by system
debris and pollutants
Installation
The fi lter can be installed almost anywhere in a heating
system, however to maximise the effectiveness, it should be
placed before the boiler and after the last radiator.
Product info
Part number 7 716 192 609
The Worcester Greenstar
System Filter
At the centre of this innovative design is a highly powerful
magnet that removes the magnetic debris (magnetite) that
is present in the heating system water. The central location
of the magnet ensures that magnetite is collected quickly
and retained, maximising the overall protection. Any
non-magnetic debris is caught by the twin-action cyclonic
trap, a proven technology that offers a capacity to collect
up to 200g of magnetite a year.
The Greenstar System Filter has been extensively
tested in simulated systems, proving its effectiveness
in removing iron oxide, magnetite, limescale particles,
casting sand, welding debris, non-magnetic metal fl akes,
paint particles and other system pollutants.
Features Benefi ts
Highly effective fi lter
Safeguards the boiler against
damage and protects the
effi ciency of the system.
Saves up to 6% a year on
energy bills*
Prevent blockages in radiators
A warmer home and
quieter system
High powered internal magnet
Proven technology that
can capture up to 200g
of magnetite
Cylindrical design
Increased performance –
better installation options
Twin-action – magnetic and
non-magnetic fi ltration
Instantly effective against a
wide range of system debris
No power consumption or
moving parts
No electrical wiring
connection or supply needed.
Zero running costs and no
failure of components
Can be installed under the
boiler or away from the
appliance
Flexibility
One-way valve for adding
system chemicals
Removes the need to isolate
a section of the system when
carrying out servicing and
maintenance
Worcester, Bosch Group
specifi cation and design
Reliability of components
and fi lter
*Independent research carried out by GASTEC at CRE

Related product manuals