Appliance information
Greenstar Danesmoor External
ErP+
and External System
ErP+
6720821725 (2018/04)8
3.4 Layout and components - 18/25 Regular appliance shown
Fig. 2 18/25 Appliance shown
Figure 2 does not include the top, front, and right hand side panel.
1 Control box assembly 18 Primary heat exchanger
2 Flue manifold access cover 19 Oil isolating valve
3Flue gas sampling point 20 Optional oil return position
4 Casing side panel 21 Burner mounting plate
5 Flue overheat thermostat phial 22 Base plate and oil drip tray
6 Control & manual reset overheat thermostat phial 23 Primary heat exchanger drain
7 Auto-reset high-limit thermostat phial 24 Burner air intake - connected by flexible duct (9) to air inlet casing (8)
8 Air inlet casing 25 Burner motor - behind plastic cover
9 Flexible air duct (connecting to air intake on burner) 26 Oil pump - behind plastic cover
10 Secondary heat exchanger bleed point (one on each side) 27 Lockout reset button (on front of burner control box)
11 Secondary heat exchanger 28 Combustion chamber access door (primary baffle inside)
12 Heat exchanger flow pipe 29 One piece baffle arrangement
13 Secondary heat exchanger drain 30 Combustion chamber
14 Condensate outlet 31 Mode switch
15 Condensate trap 32 Boiler overheat reset button
16 Condensate drain pipe 33 Flue overheat reset button
17 Flexible condensate drain pipe connection 34 Temperature control knob
Table 3 Appliance component details (Regular model)
6720809437-02.1Wo
67
29
28
30
24
26 2527
21
1
4
2
3
5
31
32
34
33
20
16
18
19
9
10
11
13
14
15
17
12
8
22
23
To Next Page
Loading...
