Bosch Worcester Greenstar Ri ErP + Series - Appliance Operation

10
Controls
Greenstar Ri
ErP +
- 6 720 821 669 (2018/06)
4.1 Operating the appliance
4.1.1 Switching the appliance ON/Off
▶ Turn the “MAINS POWER” knob to 1 to switch ON the appliance.
▶ Turn the “MAINS POWER” knob to 0 to switch OFF the appliance.
Fig. 4 Switch ON/OFF appliance.
4.1.2 Setting the appliance flow temperature
1. Turn the central heating temperature control knob [1] to the desired level.
The temperatures range available is between approximately 35 to 82°C. This is not the room temperature but the flow
temperature through to the system (radiators and/or hot water cylinder).
2. When there is a demand for heat, the appliance burner indicator [2] will be illuminate to indicate that the appliance is firing.
Fig. 5 Central heating temperature control
6720813340-02.1Wo
1
ON
OFF
Appliance frost protection function
▶ The appliance frost protection function will not work if the mains power knob is switch to OFF.
6720813340-03.1Wo
1
2
35ºC
82ºC