6
General information
Greenstar Ri
ErP +
- 6 720 821 669 (2018/06)
Maintenance tips
• Appliances on a sealed heating system:
– Regularly check the system pressure.
• Do not obstruct the flue outlet or the air inlet.
• Use in hard water areas:
– In exceptionally hard water areas a device to prevent
scale formation may be fitted. Installation of a scale
inhibitor assembly should be in accordance with the
requirements of the local water company. An isolating
valve should be fitted to allow for servicing.
2.5 Benchmark standard
The Benchmark initiative is a
code of practice to encourage
the correct installation,
commissioning and servicing of
domestic central heating
appliances and system
equipment.
A “checklist” is dispatched with every appliance and can be
found towards the back of the Installation, Commissioning and
Servicing Instructions. This is a vital document that needs to be
completed by the installer at the time of installation. It confirms
that the appliance has been installed and commissioned
according to the manufacturer's instructions.
The service record provides space for the recording of regular
servicing of the appliance/heating system and this can become
a valuable document when, for example, you wish to sell the
property. The service record will show a potential purchaser
that the heating system has received regular professional
maintenance and servicing during its lifetime.
The Benchmark initiative aims to:
• Raise standards among professional installers
• Build and maintain high safety standards in the industry
• Improve customer satisfaction levels
• Make a contribution to the nation's commitment to climate
change
2.6 User caution
• It is forbidden for any interference with the appliance other
than those actions allowed in this document.
Important note:
▶If you have to add water regularly in your
heating system, call a competent,
qualified person.
CAUTION: Incorrect use
▶ Any incorrect use can result in danger to
the householder.
To Next Page
Loading...
