6 720 607 845 (2015/05)
Use | 9
3Use
3.1 Before starting up the heater
▶ Check if the gas indicated on the rating plate is the same as
the one used at the location.
▶ Open the gas valve.
▶ Open the water valve.
3.2 Turning the heater on and off
Turning on
▶ Press the switch , position .
Fig. 3
Green light on = Main burner on
Fig. 4
Turning off
▶ Press the switch , position .
3.3 Water flow
If the red LED starts flashing, check the water pressure.
Fig. 5
Open all water and gas blocking devices.
Purge the pipes.
CAUTION:
The front panel in the burner and pilot burner
area may reach high temperatures, with risk of
burning in case of contact
CAUTION:
▶ Initial startup must be performed by a
qualified technician who will provide the
client with all the necessary information
for optimum operation of the gas heater.
To Next Page
Loading...
