Bosch WTE86300US/03 - Troubleshooting Common Issues; Preliminary Fault Checks; Dryer Problem Diagnosis Table

Troubleshootin
RISK OF ELECTRICAL SHOCK !
EXPLOSION HAZARD!
Repairs or replacement of parts
may be carried out by authorized
technicians only.
Before calling the customer service,
check whether you can rectify the
fault yourself by means of the
following table.
If a fault cannot be rectified or
a repair is required:
1. Set program selector to "Off".
2. Turn off the circuit breaker.
3. Pull the mains plug out of the
socket.
4. Call customer service
(see page 22).
Problem
Dryerdoesnotstart.
"Start/Stop"indicatorlightdoesnot
illuminate.
Programhasbeeninterrupted."Filter"
indicatorlight illuminates,awarning
signalis emittedandthe displayshows
"F:01" or "F:02".
Drumlightdoesnotfunction.
"Start/Stop"indicatorlightdoesnot
illuminate."WrinkleblocWFinished"
indicatorlights.
Thedisplayshows" 0-".
Possiblecause
Mainplugnot insertedat allor notinsertedcorrectly.
A fuseofpowersupplyhastripped.
"Start/Stop"buttonnotpressed.
Doornot closed.
Ambienttemperaturebelow41 °F/5°C.
Lintfilter dirty.
Faultin programsequenceor malfunction.
Theroom/cabinetis notadequatelyventilated.
Noprogramselected.
Lightbulbdefective,lightbulbburnedout.
Nopowersupply.
Faultin programsequenceor malfunction.
Moisturesensordirty.
Remedialaction
Insertmainplugcorrectly,
Replace/switchon fuse,
Press"Start/Stop"button,
Closedoor,
Increaseroomtemperature,
Cleanfilter as describedonpage19,
Switchoff/switchonagain,
Switchoff dryer,leavetocooldownfor 30 min,
switchon again,Restartprogram,
Provideanadequatesupplyoffreshair,
Switchoff/switchonagain,
Selectprogram,
Changelight bulb,seepage20,
Guaranteepowersupply,
Switchoff dryer,leavetocooldownfor 30 min,
switchon again,Restartprogram,
Cleanmoisturesensoras describedon page20.
Switchoff/switchonagain.
"Start/Stop"indicatorlightflashesand Condensationoutlet. Checkhosefor condensationoutlet.
thedisplayshows"F:03".
Laundrywastoo wet.
Unsuitableprogramselected.
Maximumdryingtimewasexceeded.
Degreeof dryinghasnot beenreached
or thedryingtime istoo long.
Displaymayindicate"F:04".
Motorlimittemperaturewasexceeded.
Spinlaundryat higherspeedinthe washing
machine.Switchoff/switchon again.
Selectprogramwithaid of theprogramselection
table(seepage26).Switchoff/switchon again.
Cleanlintfilter (seepage19).
Checkhosefor condensationoutlet.
Spinlaundryat a higherspeedin yourwasher.
Switchoff dryer,leavetocooldownfor 30 min.
Switchon again.Startprogram.
21