Bosch WTR85T00AU - Page 34

en Appliance settings
34
2. Press and hold Start/Pause A. At
the same time:
3. Set the programme to position 2.
4. Release Start/Pause A.
You can now alter the appliance
settings.
Adjusting the volume of the audible
notification signals
You can adjust the volume of the
notification signal emitted at the end of
the programme.
Adjust the appliance setting as
follows:
1. Set the programme to position 3.
The current setting will appear on the
display.
2. Press Drying Time 5 or Finished
inñ until the required setting
appears on the display.
Settings:
3. Alter any additional appliance
settings you require or save and exit
the appliance settings.
Adjusting the volume of the audible
operating signals
You can adjust the volume of the
buttons for operating the appliance.
Adjust the appliance setting as
follows:
1. Set the programme to position 4.
The current setting will appear on the
display.
2. Press Drying Time 5 or
Finished in ñ until the required
setting appears on the display.
Settings:
3. Alter any additional appliance
settings you require or save and exit
the appliance settings.


#
+
3
;


#
+
3
;
0 Off
1 Low
2 Medium
3 High
4 Very high
0 Off
1 Low
2 Medium
3 High
4 Very high


#
+
3
;