en Cleaning and maintenance
42
b) Pull the insert out horizontally.
c) Rinse the insert under running
water and dry it off.
d) Clean the opening in the
appliance with a soft, damp cloth.
Note: Take care not to damage the
heat exchanger, as it is exposed.
e) Carefully clean the fins on the
heat exchanger with a vacuum
cleaner and brush attachment.
Note: Always clean the fins on the
heat exchanger from top to bottom,
taking care not to bend or damage
them.
f) Push the insert in horizontally
until you hear the tab click into
place.
10.Slide the heat exchanger cover in by
its grip.
Note: You can only slide the heat
exchanger cover in if the insert is in
the appliance.
To Next Page
Loading...
