en Draining the condensation water
36
6. Secure the other end of the drain
hose in place using the remaining
accessories (depending on the
connection type).
Wash basin:
Siphon:
The connection point must be
secured using a hose clamp
(clamping range 12-22 mm).
Floor drain:
Caution!
Risk of material damage due to
leaks or draining water.
Secure the drain hose to prevent it
from slipping out. Do not kink the
drain hose. The difference in height
between the installation surface and
the drain should not exceed 100 cm.
Caution!
Risk of accumulated water being
drawn back into the appliance and
causing material damage.
Check that the water drains away
quickly. The drain must not be
sealed or blocked.
7. Pull out the condensation container
horizontally and empty it.
8. Turn the condensation container
180° onto its underside and remove
the stopper that is fitted.
9. Turn the condensation container
180° again and insert the stopper
into the recess in the top of the
condensation container.
To Next Page
Loading...
