Bose CineMate 15 - Customizing the Power Button; Resyncing Cable;Satellite Box and TV; Switching Between Sources

Using
the
System
Customizing
the
power
button
You
can customize the
0
(power button)
on
your remote to power on/off your
CineMate®
15
system,
TV
and
cable/satellite
box
simultaneously.
1.
Program your remote to
control
your
TV
and
cable/satellite
box
(see
page
23).
2. Press CBL-SAT and
TV simultaneously
and
hold
for ten seconds.
Both buttons
trash
three times.
Resyncing
your
cable/satellite
box
and TV
After customizing the power button, your
cable/satellite
box and
TV
may become
out of sync and not power on/off
simultaneously.
Use the
following steps to resync
your system.
1. Press the source button for the device that
is
out
of
sync.
2.
Press
Source
0 to power on/off the source.
3.
PressO.
Your devices power on/off
simultaneously.
Switching
between
sources
You
can switch from one source to another by pressing the appropriate source
button
on
the remote.
In
addition to
controlling
the
selected
source, the remote
always controls the basic speaker functions (on/off,
volume,
mute) of your
CineMate®
15
system.
Note:
Before you begin, ensure you have
correctly
programmed your sources.
1.
Press the button for the source you want to
control.
The source button
glows.
2.
Press
Source
0.
The source powers on.
3.
Press
TV
Input
to
select
the correct input on your
TV.
You
may need to press
TV
Input
several
times to
select
the
TV
input for the
source.
On
some
TVs,
TV
Input
displays a menu. Use your CineMate®
15/1
0
system
remote to choose the correct
TV
input and
close
this menu.
24-
English