Care
and Maintenance
eplacing
the
remote
batteries
Cine
Mate®
15
system
remote
Replace
both batteries when the remote
control stops operating
or
its range seems
reduced. Use Alkaline
batteries.
1.
Slide open the battery compartment cover
on
the back
of
the remote.
2.
Remove both batteries.
Dispose of the batteries according
to
the regulations
in
your area.
3.
Insert
two AA (IEC-LR6)
1.5V batteries or the
equivalent. Match
the+
and-
symbols
on
the batteries with the + and - markings inside the compartment.
4.
Slide
the battery compartment cover back into
place.
Cine
Mate®
10
system
remote
Replace
the battery when the remote
control
stops
operating or its range seems
reduced. Use a lithium
battery.
1.
Using a coin, turn the battery cover
slightly left.
2.
Remove the cover and insert the new battery
(CR2032
or
DL2032) flat
side up,
with the
plus
(+)
symbol
in
view.
3.
Reseat the cover and turn it right to
lock into
place.
English- 29
To Next Page
Loading...
