Care
and Maintenance
Performing a system software update
System software updates may be
available periodically
from Bose and can be
downloaded
over the
Internet to the USB drive
included
with your system.
1.
Press the
Setup
button on the front of the
control console
to
display
the
UNIFY®
menu.
2.
Using the remote navigation buttons, select
Update.
3.
Follow
the instructions on the screen.
Note:
To
make sure your Bose remote
is
updated,
hold
the remote near the front
of
the
control console while
it
is
being updated.
Contacting customer service
For
additional help
in
solving problems,
contact
Bose®
Customer Service. See the
address sheet
included
in
the carton.
Replacing
the
batteries
Replace all four batteries when you notice a marked decrease
in
the range or
response of your remote
control,
or when you see the
low
battery icon on the
remote
display.
Low battery
icon
1.
Slide
the battery compartment cover off the back of the remote
control.
AA
(IEC-LR6)
batteries
(4)
Battery compartment cover
2.
Remove the
old
batteries.
3.
Install
four new AA
(IEC-LR6)
1.5V batteries, matching the
polarity
markings
(+
and-)
to the markings inside the battery compartment.
4.
Slide
the battery cover back into
place.
30-
English