AM199736_06_V.pdf October 29, 2001 21
Operating Your Lifestyle
®
30 System
Remote control
Additional system controls
Function
SURROUND
• Press and release to select SURROUND (5-speaker) mode for all sources.
• Press and hold for 3 seconds to engage (1 chime) or disengage (2 chimes) simulated surround for monaural
program sources.
• Press and hold for 8 seconds to restore (3 chimes) factory settings for speaker mode and surround
volume level.
STEREO+CENTER
• Press and release to select STEREO+CENTER (3-speaker) mode for all sources.
• Press and hold for 8 seconds to restore (3 chimes) factory settings for speaker mode and center
volume level.
STEREO
• Press and release to select STEREO (2-speaker) mode for all sources.
• Press and hold to engage (1 chime) or disengage (2 chimes) Digital Dynamic Range
®
compression.
SURROUND + / –
• In SURROUND (5-speaker) mode, raises or lowers volume of surround speakers.
• In STEREO+CENTER (3-speaker) mode, raises or lowers volume of center speaker.
• In STEREO (2-speaker) mode, + selects the SURROUND mode.
Note:
The adjustments made with SURROUND + and – will be remembered even if you select another
speaker mode.
SURROUND
STEREO+CENTER
STEREO
SURROUND
Note:
If you set the master volume level very high or very low, a built-in feature automatically resets it to the threshold
level the next time the system is turned on.
Note:
To restore all factory default settings, turn power off then on, press and hold the SURROUND
SURROUND
(5-speaker) button until you hear the 3-chime confirmation tone, then press and hold the STEREO+CENTER
STEREO+CENTER
button (3-speaker) until you hear the 3-chime confirmation tone.
To Next Page
Loading...
