INSTALLATION
English
11
Placing the cube speakers
When you place your speakers approximately as shown in
Figure 8 on page 11, they provide the audio atmosphere
of a home theater. You can experiment with speaker
placement and orientation to produce the most pleasing
sound.
CAUTION:
Select a stable and level surface for all speakers.
Vibration can cause speakers to move, particularly on smooth
surfaces such as marble, glass, or highly polished wood.
Note: If, after running the ADAPTiQ
®
audio calibration
system, you move one or more speakers to a substantially
different location, you should re-run the ADAPTiQ
®
audio
calibration system.
Figure 8 Approximate speaker locations
Rotate the top cube toward a wall or
other hard surface.
To Next Page
Loading...
