35
SET UP PROCEDURES (Continued)
17. Expansion connection - Audio and control connection (RJ-50). Use when connecting multiple MSA12X
loudspeaker modules.
18. Power connector - Use the included power interconnect cable to connect multiple MSA12X loudspeaker
modules. Use the power interconnect cable that is appropriate for your region.
NOTE: The MSA12X is commonly installed with the Input panel located at the bottom of the unit, and the
output panel is located at the top of the unit. However, the unit can be rotated 180 degrees for installation,
which reverses the positions of the input and output panels.
19.
Install Bose
®
ControlSpace Designer
®
, Figure
25.
Note: Visit pro.Bose.com to download the latest soft-
ware version of ControlSpace Designer, which includes
product fi rmware, the latest algorithms and a detailed
help system.
Figure 25
Figure 26
20. Install Dante Controller
, fi gure 26.
Note: Dante Controller is a free software application that
enables you to route audio and confi gure devices on a
Dante network. Download Dante Controller from Audi-
nate.com.
Figure 24
Output Panel
RISK OF ELECTRICAL
SHOCK. DO NOT OPEN.
EXPANSION OUT/
CONNECT ONLY TO MSA12X/
MSA12X
100-240V ~ 50/60Hz
4A/400W MAX
AVIS: RISQUE DE CHOC.
ELECTRIQUE NE
PAS OUVRIR.
17
18
To Next Page
Loading...
