EasyManua.ls Logo

Bose Panaray MSA12X - Setting Power On State and Parameter Sets

Bose Panaray MSA12X
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
29. Download the free VLC media player. This
application will allow you to use digital audio les
from your computer and install them to VLC media
player and be able to control the volume with the
computer mouse as indicated by an arrow in Figure
29.
Note: Keep the Dante volume at minimum until
you are ready to start testing, then slowly bring the
volume up. There are no separate volume controls
on the MSA12X.
SET UP PROCEDURES (Continued)
Figure 29
30.Open ControlSpace Designer, an MSA12X
box will appear as shown by an arrow in gure 30.
Double click on the grey box as shown by an arrow
in Figure30.
Figure 30
31. A control panel will appear as shown in gure
31. Select Dante from the input & speaker EQ. To
access analog audio via the Phonex connector,
select the Analog input & speaker EQ.
Note: In the System tab of ControlSpace Designer,
select Enable End Point Control. Also, insure that the
main beam and 2nd beam gain is at zero.
Figure 31

Other manuals for Bose Panaray MSA12X

Related product manuals