Bose Smart Ultra Soundbar - Managing Bluetooth Connections

35
|
ENG
BLUETOOTH CONNECTIONS
DISCONNECT A MOBILE DEVICE
Use the Bose Music app to disconnect your mobile device.
TIP: You can also use Bluetooth seings on your mobile device. Disabling Bluetooth
disconnects all other devices.
RECONNECT A MOBILE DEVICE
On the remote, press the Bluetooth buon l.
The soundbar tries to connect with the most recently-connected devices.
NOTES:
• Make sure Bluetooth is enabled on your mobile device.
• The device must be within 30 ft (9 m) and powered on.
CONNECT AN ADDITIONAL MOBILE DEVICE
You can store up to eight devices in the soundbar device list.
NOTE: You can play audio from only one device at a time.
1. On the remote, press and hold l until the light bar pulses blue.
2. On your mobile device, select your soundbar from the device list.
NOTE: Make sure Bluetooth is enabled on your mobile device.
CLEAR THE SOUNDBAR DEVICE LIST
1. On the remote, press and hold l for 10 seconds until the light bar pulses white
twice then fades to black.
The light bar pulses blue.
2. Delete the soundbar from the Bluetooth pairing list on your device.
All devices are cleared from the pairing list, and the soundbar is ready to connect
to new mobile devices (see page 34).