Need help?Do you have a question about the Bose Soundbar 500 and is the answer not in the manual?
General| Voltage | 24 V |
|---|---|
| Housing color | Black |
| AC adapter included | Yes |
| Apple docking compatibility | Not supported |
| Cables included | DC, HDMI |
| Receiver included | - |
| Certification | CE |
| Built-in display | No |
| Recommended usage | Universal |
| Connectivity technology | Wired & Wireless |
| Digital audio coaxial in | 0 |
| Audio decoders | Dolby Digital |
| RMS rated power | - W |
| Audio output channels | - channels |
| Transmitting power | 20 dBmW |
| Number of mid-range drivers | 5 |
| Power consumption (standby) | 0.5 W |
| Mobile operating systems supported | Android, iOS |
Weight and Dimensions| Depth | 101.6 mm |
|---|---|
| Width | 800 mm |
| Height | 44.4 mm |
| Soundbar weight | 3180 g |
Position the bass module at least 1-3 ft away from other wireless equipment for optimal placement.
Connect to the Bose Music app, tap your soundbar, and navigate to add accessory speakers.
Position the bass module at least 1-3 ft away from other wireless equipment.
Connect the bass module to a power source; it will power on automatically.
Use a 3.5 mm audio cable to connect the bass module to the speaker's dedicated BASS connector.
Position the bass module at least 1-3 ft away from other wireless equipment.
Connect the bass module to a power source; it will power on automatically.
Use the remote control to initiate connection with the soundbar until it indicates success.
Connect the ADAPTIQ headset to the soundbar and place it on your head for calibration.
Initiate the ADAPTIQ calibration process using the remote control until the soundbar confirms completion.
To Next Page
