Bose SoundTouch 10 - Page 38

38
FUNCTIONAL TEST PROCEDURES
5. BLUETOOTH TEST
For this test, use a Cell phone with A2DP Blue-
tooth, such as an iPhone
®
(Advanced Audio
Distribution Prole) pair SoundTouch
®
10 and
Bluetooth device.
5.1 Plug in the power to the unit and turn on
the SoundTouch 10.
5.2 Once boot up ready, press and hold the
Bluetooth button until the LED blinks blue to
make the unit discoverable.
5.3 From the Bluetooth device list, select the
device named “SoundTouch™ 10”. Once
paired, the LED on the unit should turn a solid
white.
Note: If you are prompted for a pass code,
enter 0000.
5.4 Play a familiar audio track from the Blue-
tooth device.
5.5 Listen for a clean undistorted sound with
no audio drop outs.