Source selection
After programming the remote control, you can switch between sources by selecting different inputs on your TV using
the remote control.
Notes:
To use the Bluetooth® source, you must pair a mobile device to the soundbar.
Pressing AUX, or on the remote control does not switch the source. It turns on the soundbar
and changes the mode of the remote so that the remote can control your source’s functions.
1. Press the button for the source you want to control.
The source button glows.
2. Press .
The source powers on.
3. If the source is connected to your TV, press and select the correct input on your TV.
To stream music from your Bluetooth® phone or other mobile device, you must pair your mobile device with the
soundbar.
Note: For more information on using Bluetooth® functions, refer to the owner’s guide at
global.Bose.com/Support/ST300
Pairing a mobile device
To Next Page
Loading...
