Bose SOUNDTOUCH 300 - Finishing Soundbar Setup; TV Speaker Deactivation and Sound Check

ENGLISH - 21
FINISHING SOUNDBAR SETUP
Turning o your TV speakers
To avoid hearing distorted audio, turn o your TV speakers.
Refer to your TV owner’s guide for more information.
Checking for sound
1. Power on your TV.
2. If you are using a cable/satellite box or other secondary source:
• Power on this source.
• If your secondary source is connected to your TV, select the appropriate TV
input. If you have not programmed the remote control, you may need to use a
dierent remote.
3. Power on the soundbar.
You should hear sound coming from the soundbar.
4. Press on the remote control.
You should not hear sound coming from the TV speakers or soundbar.
Note: If you don’t hear sound coming from the soundbar or do hear sound coming
from your TV speakers, see page 49.