Need help?Do you have a question about the Boss Audio Systems Riot REV-1035 and is the answer not in the manual?
General| Power Output (Max) | 1000 Watts |
|---|---|
| Channels | 1 |
| THD at RMS Output | 0.01% |
| Fuse Rating | 30 A |
| Frequency Response | 20 Hz to 250 Hz |
| Impedance | 2 Ohm |
| RMS Power at 4 Ohms | 65 Watts x 4 + 170 Watts x 1 |
| Minimum Impedance Unbridged | 2 Ohm |
| Subwoofer Frequency | 50Hz - 250Hz |
| Bass Boost | 0 to +18 dB |
| RMS Power Output | 65 Watts x 4 + 170 Watts x 1 @ 4 Ohms |
| Input Sensitivity | 0.2V - 6V |
Wiring for operating subwoofer and main speakers simultaneously in stereo/mono.
Wiring for subwoofer and main speakers using tri-mode on 4-channel amplifiers.
Advice on investigating car layout before drilling or cutting for installation.
Guidelines for secure mounting and protecting wire connections.
Instructions to disconnect battery and turn off equipment before wiring.
Steps to diagnose and resolve issues where no audio output is produced.
Steps to troubleshoot when only one channel of the amplifier is functional.
Guidance on adjusting sensitivity for improved output levels.
Diagnosing and resolving noise issues like whining or clicking.
To Next Page