Need help?Do you have a question about the Boss marine MR800 and is the answer not in the manual?
General| Bass boost | 0 - 18 dB |
|---|---|
| Damping factor | 125 |
| Amplifier class | A/B |
| Frequency range | 9 - 50000 Hz |
| Output impedance | 2 Ω |
| Built-in crossover | Yes |
| Crossover frequency | 40 Hz |
| Audio output channels | 2.0 channels |
| Peak power per channel | 400 W |
| Subsonic filter frequency | 200 Hz |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Total Harmonic Distortion (THD) | 0.01 % |
| RMS power output per channel (4 Ohm) | 125 W |
| Bridge-mode power output per channel (4 Ohm) | 800 W |
| XLR in | No |
| Audio (L/R) in | 2 |
| Line inputs (RCA) | 1 |
| USB 2.0 ports quantity | 0 |
| Speakers connectivity type | Clamp terminals |
| Purpose | Boat |
| Cooling type | Passive |
| Product color | Aluminum |
| Volume control | Rotary |
| Remote control type | W |
| Connectivity technology | Wired |
| DC input voltage | 10 - 14 V |
| LED indicators | Power, Status |
Weight and Dimensions| Depth | 222.25 mm |
|---|---|
| Width | 196.85 mm |
| Height | 57.15 mm |
Lists the items included in the amplifier package, such as the amplifier, cables, and remote control.
Explains the amplifier's ability to operate efficiently at 2 Ohm loads and its implications for power output and current draw.
Details the amplifier's protection circuitry, the conditions that trigger it, and how to reset it.
Explains the role of fuses in protecting the amplifier and boat system, and the importance of using correct replacements.
Details steps for securely mounting the amplifier in the marine environment.
Provides step-by-step instructions for connecting the amplifier's power, ground, and remote terminals.
Details power and speaker wiring for the MR800 in Two Channel and Bridged modes.
Details power and speaker wiring for the MR1000 in Four Channel mode.
Details power and speaker wiring for the MR1000 in Bridged mode for subwoofers.
Explains Tri-Mode operation for the MR800, connecting main speakers and a subwoofer using specific crossover components.
Explains Tri-Mode operation for the MR1000, connecting main speakers and subwoofers using specific crossover components.
To Next Page